Support for bike carrier adjustable wall mounting

Features

• The racks are suitable foralmost any wall.They optimize space usage without compromising safety and do not require strenuous lifting. They accommodate tires with a maximum width of up to 3.4 inches.

• Easy to install, no assembly required.A sturdy hook allows you to hang your bike in less than a second. Multiple bikes can be safely mounted with a spacing of11 incheswith minimal risk of the bike falling.

• Space-saving designideal for corners in the shed and garage.

• Sturdy, scratch-resistant hook - the surface of the hook is covered with a thick rubber layer to protect your bike's rim.

• This bike holder is extremely slimup to 0.1 inches thick and weighs only 1.25 lbsso it won't deform. The maximum weight that can be hung is65 pounds.Strong enough for mountain bikes, racing bikes, folding bikes, children's vehicles, etc.

Specifications

• MaterialSteel and coating

• Size260mm * 78mm

• ColorBlack

• Weight600g

• Maximum load capacity＜30kg

• Delivery content: Hook * 1, Nails * 4

Installation

1. Position the bracket at the desired wall location. Mark each drill hole on the wall with a pencil or marker.
2. Remove the wall bracket and drill a pilot hole at the marked spots. (Use a 1/8" bit for drilling into a beam without a wall anchor or a 1/4" bit for using wall anchors)
3. If necessary, push the anchors into the drilled holes.
4. Align the bike wall mount with the drilled holes. Tighten the screw with a screwdriver and secure the bracket to the wall or anchors.
5. When removing, the weight of the bike should rest on the scratch-resistant rubber head of the wall mount. To remove the bike, lift it to relieve the weight and detach it from the hook before lowering it.